If you have a Dell monitor, you may want to learn how to remove the monitor stand. Luckily, this task is easy and can help you customize your computer’s setup. You will need to unplug your device and any power cords to get started. Next, you will need to remove the Dell monitor’s stand, easily removed with a butter knife. After removing the stand, you can replace it with another one or clean the old one.
Step 1:
The first step is gently pulling the monitor stand away from your computer. You may need to unhook the monitor from the stand’s base, so make sure you use a soft cloth or cushion to prevent any damage to your monitor. You can then press the release latch on the monitor’s VESA cover to remove it. To replace the stand, unscrew the screws and slide the monitor away. Once you’ve removed the stand, you can install a new one.
Step 2:
To remove the monitor stand, you’ll need to remove the screws. You’ll need to use a screwdriver and a soft cloth to lift the monitor off the surface. Once you’ve removed the screws, you can remove the monitor’s stand assembly. To remove the display, you must remove the VESA cover. Then, you’ll need to unplug the monitor. Once you’ve removed the cover, you can remove the VESA cover.
You’ll need a soft cloth or cushion to remove the stand from the Dell monitor. Then, press down on the bottom of the monitor’s stand to access the release latch. After removing the stand, you’ll need to remove the VESA cover. Lastly, you’ll need to dismantle the display. You’ll need to remove the display’s VESA cover when you’ve removed the display.
Step 3:
You’ll need a screwdriver and a paper towel to remove the Dell monitor stand. Place the monitor face down and use a long screwdriver to loosen the screws. After removing the stand, you’ll need to unscrew the remaining screws carefully. This will allow you to replace the LCD with another one. This way, you’ll be able to change the look of your monitor.
Step 4:
You’ll need a screwdriver and a paper towel to remove the heavy Dell monitor stand. Using the screwdriver, you’ll need to find the VESA cover. To do this, you’ll need to unscrew the screwdriver and pull the stand column out of the monitor’s base. Then, you’ll need to uninstall the VESA cover by lifting the latch and sliding the display down.
